Equipment Rentals
List Your Equipment
Equipment operator with a yellow hard hat and gloves greasing an excavator
Equipment operator with a yellow hard hat and gloves greasing an excavator
Machine Grease 101: The Best Grease Guide For Heavy Equipment
5 minute read
Avatar of the author
Tim Forestell
January 19, 2023

Machine Grease 101: The Best Grease Guide Heavy Equipment

While greasing heavy equipment seems to be an equipment operator or mechanic's least favorite part of the job, it is also one of the most important. Ignoring this task can cause unnecessary wear and tear on heavy equipment, leading to more maintenance costs and equipment downtime. It's also less likely that new equipment will be handed over to operators who don't take good care of their machines.

We put together this resource to help equipment operators maintain their heavy equipment. Here, we will go over topics like the best grease for heavy equipment, where to locate grease zerks, nipples, or fittings, how often you should grease, and more.

Why Greasing Heavy Equipment is Important

As mentioned, avoiding using machine grease and lubricant can cause severe issues with the longevity of a machine. This is because grease prevents dirt contamination and wear down of important joints, and keeps pins and bushings healthy for longer periods.

Stay Ahead, Stay Equipped

From tailored equipment guides to the best rental rates on machines near you. Join 100,000+ contractors getting pro tips and insights from DOZR.

Heavy equipment ownership, maintenance, and insurance are significant costs for many contractors. Anything that helps reduce financial risk should be taken seriously.

A zerk fitting on a piece of heavy equipment
An example of a zerk fitting

However, greasing can be frustrating as it's a tedious and labor-intensive task and can take a while if you're working with unfamiliar equipment. Part of this is because every equipment manufacturer has different grease locations, making it easy for some spots to be forgotten. It also requires cleaning each of the grease nipples before applying new grease, which can be time-consuming depending on the job as dirt build-up can be intense.

Becoming familiar with your machine, reading the manual for where the grease zerks are located, and using battery-powered grease guns can make this job much easier. Using cleaning products like RamRodz can help you clean those hard-to-reach grease nipples better than a common rag.

A grey, dusty manual grease gun lying on the ground
While manual grease guns work, having a battery-powered one can save
so much time and effort.

Frequently Asked Questions About Grease

What is the best grease for my skid steer and other equipment?

The best grease for your heavy equipment will be the type suggested in the operation manual. However, most construction equipment requires at least an NLGI #2 type of grease.

It's important to note that different locations on a machine might require a different grease type. It all depends on the operating temperature of that joint.

Some machines now come with an auto-lubrication system which would require lighter, less thick grease like an NLGI #1 or #0.

What are the grease points on excavators and other heavy machinery?

Excavator grease points, as well as on any other heavy equipment, are wherever there are zerk fittings, nipples, or loader pins. These zerks will be anywhere that has hinge points on the equipment. Typically, the majority of them will be found on the boom, lift, and attachments.

Operation manuals will often show you areas where grease fittings are located but won't pinpoint every single one so some searching may be required. It will also vary from manufacturer to manufacturer, but once you understand where they are, that knowledge should transfer over from machine to machine.

How often should I grease heavy equipment?

Greasing heaving equipment is often considered a daily maintenance task for many equipment operators along with fueling and locking up the machines. However, not everywhere is required to be greased every day. Information will be in the operation manual about where to grease and how often. Skipping greasing schedules can be detrimental to the performance of the machine as the wear on pins and bushings will cause failure in performance.

While there is no exact science about the best schedule to grease, it's better to be safe than sorry. You should be doing a walkaround of the equipment every time you get out of the machine to check tires, hoses, cylinders, attachments, and grease levels. Once you hear grinding on the machine, you'll know it is too late and is causing damage to the equipment.

Can you over-grease your heavy equipment?

The short answer is yes but the longer answer is it's better to over-grease than under-grease. If you do over-grease, just make sure to wipe down any excess grease that might be showing so no dirt is collected.

A best practice is to give two or three pumps per grease zerk or until you see the grease come out of the machine slightly.

Should I be removing old grease?

Yes! Cleaning the joint of any old, dirty grease before you apply new grease is very important. However, if done with the correct schedule, this should be very easy to do as it would only have been applied recently.

Are synthetic greases better than non-synthetic?

While the kind of grease you use doesn't always matter, synthetic greases typically last longer and can perform better than multipurpose (polyurea) or moly greases. However, synthetic types are a lot more expensive. Most contractors use multipurpose or moly greases.

At the end of the day, using the grease suggested in the service and operator manual will be the best one to use. The best synthetic grease for heavy equipment is typically any NLGI #2 or #1, depending on the weather.

Do seasons and weather impact the type of grease I should use?

Yes, the weather does affect the grease type you should use. When temperatures increase, grease becomes thinner so you'll want to use a thicker, NGLI #2 type grease. This is especially important in places like Florida, Nevada, California, and Arizona where the temperature can be incredibly hot in the summer.

For colder environments or temperatures below 60 degrees Fahrenheit (16 degrees Celsius), an NLGI #1 grease will be the type you want to use. Marine grease will be your best bet if you're working in a wet or damp environment as it helps protect the machine from rust and salt damage.

Find Your Next Equipment Rental on DOZR
Mini Excavator image
1.5 ton - 9 ton
Compact Track Loader image
1,300 lbs - 3,400 lbs
Wheeled Skid Steer image
1,300 lbs - 3,450 lbs
Twitter LogoFacebook LogoLinkedIn Logo
Avatar of the author
Tim Forestell
Tim Forestell is one of DOZR’s co-founders and CCO. Tim got started in the industry as VP Operations for Forestell Landscaping before founding DOZR with Kevin and Erin. Aside from the amazing team at DOZR, his favourite thing about DOZR are the customers. Working with DOZR renters every day gives him a peek at the evolution of different projects and hearing stories about projects being developed from start to finish.
Twitter LogoFacebook LogoLinkedIn Logo
Backhoe
Tracked Skid Steers
Wheel Loader
Search For Rentals Near You
DOZR gets the best prices from 1000's of rental companies near you.
location dot icon
Set Location
magnifying glass icon
Select Equipment
Powered by
Grey Dozr Logo